90 degree short radius stainless steel elbow

Stainless steel is usually made by adding a high proportion of Cr, Ni and other alloys on the basis of carbon steel, and its content proportion can reach more than 20%. The common steel grades are 304304L, 321316316L, 1Cr18Ni9Ti and 0Cr18Ni9. The first steel grades represented by numbers are Japanese, American and one (1Cr18Ni9Ti) is domestic.

The strength of stainless steel elbow is very high, and its toughness index is among various steels. Since it is called stainless steel, its outstanding advantage is corrosion resistance. It is required to use stainless steel in corrosive occasions such as chemical industry and papermaking. Of course, the cost of using stainless steel is relatively high.

90 degree stainless steel elbow size

The size of 90 degree stainless steel elbow is generally calculated according to the diameter of the known pipe, and the bending radius is often 1.5 times the diameter. According to different models, the size of 90 degree elbow is different, and its long and short radius is also different. The larger the nominal diameter of the 90 degree elbow, the larger its size.

Stainless steel elbow refers to the elbow made of stainless steel. The difference between stainless steel elbow and elbow made of other materials is that the chemical composition contained in it will keep the elbow surface from rusting and corrosion for a long time, so the service life is longer. The size of stainless steel elbow is basically the same as that of standard elbow, without much difference.